[. . . ] —â— Press the E-MANUAL button on the regular remote control. —â— Press the MORE button on the Smart Touch Control to display control buttons on the screen. "" Words in blue refer to screen menu options and words in light blue refer to remote control buttons. Scrolling a Page To scroll a page, use of one of the following methods: ●● Press the or button on the scroll bar at the right edge of the screen. [. . . ] Pattern1 is used to calibrate the contrast, and Pattern2 is used for calibrating the colour and colour saturation. If the screen menu disappears or a different menu is activated while the screen is being calibrated, this option will save the changes up to that point and automatically deactivate that menu. Try Now ●● Motion Lighting Adjusts the picture brightness depending on the on-screen movements for reduced power consumption. This feature is only available when Picture Mode is set to Standard and is not available in 3D mode. in addition , adjusting Contrast or Brightness automatically deactivates this feature. Try Now Picture Options Screen Menu > Picture > Picture Options Try Now Picture Options Colour Tone Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Cinema Black Standard Auto Auto Low Off Standard Off "" The displayed image may differ depending on the model. When connected to a computer via an HDMI-to-DVI cable, users can only change Colour Tone. When Picture Mode is changed, the corresponding setting will apply automatically. If Picture Mode is set to Dynamic, users can only choose between Cool and Standard. Try Now ●● Digital Clean View Reduces static and ghosting caused by weak signals. Selecting Auto Visualisation displays the signal strength on the screen. This function is available for LED 7000/7500, 8000, 8500 series models only. Basic Sound Settings Screen Menu > Sound Sound Sound Mode Sound Effect 3D Audio Speaker Settings Additional Settings Sound Customiser Reset Sound Low Standard "" The displayed image may differ depending on the model. Use the Sound Settings to change the sound mode, enable/disable surround sound, adjust the equalizer, and optimize the TV's sound. Changing the Sound Mode Screen Menu > Sound > Sound Mode Try Now Sound modes make adjustments to the sound output. However, Sound Modes are not available when using external speakers only. ●● Music This mode emphasizes normal music instead of voices. —â— Movie This mode is calibrated to provide the best sound for movies. —â— Amplify This increases the overall intensity of high-frequency sounds for a better listening experience. —â— Stadium This is chosen automatically when Sports Mode is turned on under the Smart Features menu. Adjusting the Sound Settings Screen Menu > Sound > Sound Effect Try Now Use sound effects to alter how the TV projects sound. These options are available only when Speaker Select is set to TV Speaker and Sound Mode is set to Standard. [. . . ] You cannot use the remote control when you are configuring Anynet+ or switching to a viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or has switched to a viewing mode. Navigate to the System menu and verify that Anynet+ (HDMI-CEC) is set to On. If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please scan for the device again. [. . . ]